Reset pins + add reader and writer

[clump.git] / writer.v

`define STATE_WRITE_TYPE 3'd0
`define STATE_WRITE1     3'd1
`define STATE_WRITE2     3'd2
`define STATE_WRITE3     3'd3
`define STATE_WRITE4     3'd4

module WRITER (input clk, input clk_enable, output [7:0] uart_tx_byte, output reg uart_tx_signal = 0, input uart_is_transmitting, output reg finished = 0, input [15:0] result);
   reg [2:0] state = `STATE_WRITE_TYPE;
   reg [3:0] tx_hex = 0;

   hex_to_ascii h2a (.hex(tx_hex), .ascii(uart_tx_byte));

   always @ (posedge clk)
	 if (clk_enable) begin
		if(uart_tx_signal)
		  uart_tx_signal <= 0;

		case(state)
		  `STATE_WRITE_TYPE: begin
			 finished <= 0;
			 if(!uart_is_transmitting && !uart_tx_signal) begin
				uart_tx_signal <= 1;
				tx_hex <= {1'b0, result[15:13]};
				state <= `STATE_WRITE1;
			 end
		  end

		  `STATE_WRITE1: begin
			 if(!uart_is_transmitting && !uart_tx_signal) begin
				uart_tx_signal <= 1;
				tx_hex <= {3'b0, result[12]};
				state <= `STATE_WRITE2;
			 end
		  end

		  `STATE_WRITE2: begin
			 if(!uart_is_transmitting && !uart_tx_signal) begin
				uart_tx_signal <= 1;
				tx_hex <= result[11:8];
				state <= `STATE_WRITE3;
			 end
		  end

		  `STATE_WRITE3: begin
			 if(!uart_is_transmitting && !uart_tx_signal) begin
				uart_tx_signal <= 1;
				tx_hex <= result[7:4];
				state <= `STATE_WRITE4;
			 end
		  end

		  `STATE_WRITE4: begin
			 if(!uart_is_transmitting && !uart_tx_signal) begin
				uart_tx_signal <= 1;
				tx_hex <= result[3:0];
				finished <= 1;
				state <= `STATE_WRITE_TYPE;
			 end
		  end
		endcase
	 end
endmodule